Club Fiero Montreal

Section Fiero/ Fiero Section => Pièces / Parts => Discussion démarrée par: fiero_fighter le Mai 01, 2011, 17:14:02 pm

Titre: parting out a fastback and a notchie.
Posté par: fiero_fighter le Mai 01, 2011, 17:14:02 pm

I have two gt's I am parting out,
both are complete cars, fastback sail panels are no good, everthing else seems decent.  If any parts are needed PM me and I will check it.

J'ai pas mal tous les piece des deux chars encors.  PM pour prix.

merci

Titre: Re : parting out a fastback and a notchie.
Posté par: Danyel le Mai 01, 2011, 21:20:24 pm

Does the fastback have an intact (no rust) spaceframe ??? THX

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Mai 02, 2011, 09:45:30 am

Sorry, no. That's why I'm parting it out. If it was rust free you'd be the first to know

Titre: Re : parting out a fastback and a notchie.
Posté par: Danyel le Mai 26, 2011, 19:15:46 pm

How about the 2 rear bearing hubs and axles?

Titre: Re : parting out a fastback and a notchie.
Posté par: Moran4x4 le Mai 27, 2011, 09:51:14 am

Shifter automatique avec cable?

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Mai 27, 2011, 17:10:57 pm

4 vit man les 2

Titre: Re : Re : parting out a fastback and a notchie.
Posté par: Danyel le Mai 27, 2011, 21:52:46 pm

Citation de: Danyel le Mai 26, 2011, 19:15:46 pm

How about the 2 rear bearing hubs and axles?

still have them ?

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Mai 28, 2011, 17:38:49 pm

still have them.  pulled the rear suspension off complete

Titre: Re : parting out a fastback and a notchie.
Posté par: Danyel le Mai 28, 2011, 20:21:43 pm

Send PM for how much plus shipping to G6V-9T6 ... also both back up light switches .. THX
Danyel

Titre: Re : parting out a fastback and a notchie.
Posté par: Falcon_ca le Mai 29, 2011, 20:39:57 pm

By any chance, is one of the 4 speed a M19 option code ?

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Mai 29, 2011, 21:21:38 pm

both are listed as being m17, one tranny is gone, I'll double check the others code as both look to have been replaced at some point.

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Mai 29, 2011, 21:24:02 pm

Danyel, j'ai jamais eu ton pm.
une switch etait vendu avec la shifter.

je peut verifie la pois des pieces pour shipping cet semaine.

Titre: Re : parting out a fastback and a notchie.
Posté par: Danyel le Mai 30, 2011, 23:10:33 pm

okidou laisse moi le savoir  THX

Titre: Re : parting out a fastback and a notchie.
Posté par: Moran4x4 le Juin 06, 2011, 13:50:38 pm

Pour les cables....envoie moi ton numereo de telephone au    mario.dubuc@esfdirect.com

Es-tu à Montréal ?

Merci

Titre: Re : parting out a fastback and a notchie.
Posté par: Falcon_ca le Juin 22, 2011, 21:37:16 pm

Did you had my e-mails?

Titre: Re : parting out a fastback and a notchie.
Posté par: Falcon_ca le Juillet 12, 2011, 16:23:53 pm

Thanks again Logan

Titre: Re : parting out a fastback and a notchie.
Posté par: FieroAlex le Août 01, 2011, 13:35:10 pm

Do you have the Front upper driver`s side control arm for an 86 Fiero? Thanks

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Août 01, 2011, 14:00:39 pm

Sure do. Not sure on the condition tho. Where abouts are you?

Titre: Re : parting out a fastback and a notchie.
Posté par: FieroAlex le Août 01, 2011, 19:12:18 pm

I'm located in Laval however I can get around if you arn't too far.

Let me know how it looks and how much you are looking to get for it. I don't care for the ball joint as mine is new but good bushings would be nice if possible.

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Août 02, 2011, 09:06:55 am

Well, if you'd like to come take a look your more than welcome to.

Titre: Re : parting out a fastback and a notchie.
Posté par: pmbrunelle le Août 02, 2011, 19:06:33 pm

Do you have a heater core cover? The black plastic part circled in green.

Do the cars have A/C?

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Août 02, 2011, 23:39:04 pm

Yeah I should have two of them around

Both were ac cars

Titre: Re : parting out a fastback and a notchie.
Posté par: pmbrunelle le Août 04, 2011, 01:14:12 am

Have you removed the dashboards from either of the cars yet?

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Août 06, 2011, 08:19:44 am

One is pulled.  The other is still in place

Titre: Re : parting out a fastback and a notchie.
Posté par: pmbrunelle le Août 06, 2011, 21:02:37 pm

Sounds good. Think I could pick it up next weekend or something? How much do you want for it?

Titre: Re : parting out a fastback and a notchie.
Posté par: fiero_fighter le Août 08, 2011, 22:07:14 pm

Ok, sorry for any unanswered mails or posts.  iPhone went down and as it's my only Internet connection, played hell with my life.

Any parts you want are here for the taking.  Prices are all determined on site, depends on the final condition and how much of the car you walk away with.

As for timing, Friday afternoon/ night and Sunday morning work.  Sat is my one year with the wife, so a no go if I wanna see another year with both her and the fiero.

Titre: Re : Re : parting out a fastback and a notchie.
Posté par: c-l le Août 08, 2011, 23:46:43 pm

Citation de: fiero_fighter le Août 08, 2011, 22:07:14 pm

Sat is my one year with the wife

Congrad  !!!!!!    Take good care of her.................................. and the Fieros  ;D

Titre: Re : parting out a fastback and a notchie.
Posté par: pmbrunelle le Août 09, 2011, 00:37:35 am

Congratulations on one year!

Friday/Sunday sounds good.

Titre: Re : parting out a fastback and a notchie.
Posté par: foshan le Septembre 24, 2012, 22:28:02 pm

besoin une valise de gt86-88 (decklid)