Besoin daide Recherche cooling pipe bracket support ( Frame side )

[fierogtx]

bref lhistoire es trop longue a expliquer alors je suis ds la merde jai besoin de 2 cooling pipe bracket support qui sont souder avec le plancher et un bout de plancher je peux prendre une photos ce sont eux qui ont 2 trou . jai besoin de chaque coter alors si vous avez chassis ou une fiero en pieces qui a le rear frame pourri ou bref pu bonne qui pourrais me le couper bref cet endroit nest pas trop problematique pour la rouille alors merci de votre aide

[fiero_fighter]

I have a gt going to the scrap soon, if you want to pull the parts, you can have them.
Hawkesbury. 514-969-1847

[fierogtx]

I have a gt going to the scrap soon, if you want to pull the parts, you can have them.
Hawkesbury. 514-969-1847

where are you located thanks for your help

[Falcon_ca]

I have a gt going to the scrap soon, if you want to pull the parts, you can have them.
Hawkesbury. 514-969-1847

where are you located thanks for your help

He is in Hawkesbury On very near Montreal. 514-969-1847

[fiero_fighter]

I'm right on the ontario border along the 40.
I should have uppers for you as well. I'll go look now.

[fiero_fighter]

I have a set of front upper/ lower and spindles with poly's, painted black and looking very clean. They were from a project 3.1 that was parted out after the 2nd owner of the conversion gave up on it. So 0 km on them.
I am 45 min from decarie, 30min from the west island or 10 min from Grenville, depending on where you are driving from.

As for the coolant supports, I'll have to check under the car when I have time. Can't promise I'll have daylight to check before sat. 

Call me if you have questions.

[fierogtx]

I have a set of front upper/ lower and spindles with poly's, painted black and looking very clean. They were from a project 3.1 that was parted out after the 2nd owner of the conversion gave up on it. So 0 km on them.
I am 45 min from decarie, 30min from the west island or 10 min from Grenville, depending on where you are driving from.

As for the coolant supports, I'll have to check under the car when I have time. Can't promise I'll have daylight to check before sat. 

Call me if you have questions.

thanks for all your help your a great guy if you can pull the parts and ship to me i will pay you for the coolant support floor part if you have one chassis to cut i will get you a pic where you have to cut it to save shipping . for the control arm if you want to sale me only the passenger upper control arm it will be very appreciated like i wrote in my other post for the uppr control arm im looking for one without big chips or dents . dont know the condition of yours but it will be very appreciated if you can check it and give me news about that . the reason is that i take a fork to remove the ball joint and i did 2 chips under where the ball joint is so im looking for one in top shape condition or one that i will sandblast powdercoat and it will appear like new. thanks again i wait for your news if you can give me your phone in a pm i will call you again many thanks for your help

[fierogtx]

bump with a link http://www.fiero.nl/forum/Forum4/HTML/069565.html

[GT-RIC]

Ça peut se refaire home made.

[fierogtx]

je sais mais je prefere avoir les oem avec la bracket mais sinon je naurai pas le choix de men fabriquer une

[fierogtx]

bump